plasma gun
英 [ˈplæzmə ɡʌn]
美 [ˈplæzmə ɡʌn]
网络 等离子枪; 电浆枪; 等离子体枪; 等离子电枪; 离子枪
双语例句
- It seems too that there is a high-powered, high-voltage plasma accelerator which may be put to use to transmit electric current, or even to produce a'death-ray ', or quite simply to feed a plasma gun.
看来太有高功率，高电压等离子加速器可投入使用传输电流，或什至产生的死线'，或者干脆给了等离子枪。 - Monte Carlo Simulation of Electron Transport in a Nitrogen Plasma Gun
氮等离子体枪中电子输运行为的蒙特卡罗模拟 - Jet fluctuation in plasma spray gun is an essential factor affecting the spraying quality, which is mainly due to the arc divided flow.
电弧等离子体喷枪中的射流脉动是影响等离子体喷涂质量的一个非常重要的因素，射流脉动很大程度上是由于等离子体喷枪内电弧分流引起的。 - The supersonic plasma spraying gun has a single-anode, internal feeding structure.
单阳极内送粉结构的高效能超音速等离子喷枪，为国内外研究超音速等离子喷涂技术开创了一条新路。 - The plasma spectra, impurities, impurity sources and radiation mechanism of plasma gun are analysed.
分析和研究了等离子体光谱，杂质成分、杂质来源和等离子体喷枪的发射机制。 - Physical design of an inductive storage with a PEOs and plasma gun experiments
PEOS功率倍增装置的物理设计与等离子枪实验 - Numerical Simulation for Flow Field of Cooling Water in Plasma Sprayed Gun
等离子喷涂枪冷却水流场数值模拟 - The physical design and the computer simulation for inductive storage with a plasma erosion opening switch ( PEOS) have been performed and plasma gun experiments have been conducted.
对PEOS功率倍增装置进行了物理设计与模拟计算并进行了脉冲等离子体枪实验。 - A plasma gun for spraying welding inside surface of deep hole with powder is designed and developed which has the property worked continuously at high temperature.
设计并研制了深内孔等离子弧粉末喷焊枪，该枪具有在高温下连续稳定工作的优异性能。 - In this paper, the technical features, working principles and application of a Russian Thermal-Pyrolysis-Type plasma ignition technology, as well as the associated plasma gun was introduced.
介绍了俄罗斯热裂解型等离子点火技术的技术特点、工作原理、应用状况和其等离子枪的结构优点。 - At an atmospheric pressure, with CH4 as precursor and Ar as dilution gas, Diamond-Like Carbon ( DLC) films were deposited by a DBD plasma gun.
在大气压下，以甲烷为单体，氩气为工作气体，利用DBD等离子枪沉积类金刚石薄膜（DLC）。 - Based on Computational Fluid Dynamics ( CFD) and Semi-Implicit Method for Pressure-Linked-Equations ( SIMPLE) method, a model of plasma sprayed gun was developed and the flow field of cooling water was simulated.
基于计算流体力学技术，建立等离子喷涂枪冷却水流场分析模型，采用求解压力耦合方程的半隐算法（SIMPLE）对其进行数值模拟。 - A direct current plasma spray gun was designed in which separation sections were set between anode and cathode to restrict the large-scale diffluence of arc.
在此基础上，设计了一种直流等离子体喷枪，采用在阳极和阴极中间设置隔离段的方法来限制电弧的大尺度分流。 - Analysis of fluid field and temperature field inside plasma spraying gun based on ANSYS software
等离子枪体内部流场和温度场的模拟分析 - This paper presents you a simple structure plasma welding gun which is suitable for production.
本文介绍了一种适用于生产的、结构简单的等离子弧焊枪。 - Controlling of Jet Fluctuation in Plasma Spray Gun
等离子体喷枪中的射流脉动控制 - The results showed that the power used by the axial-fed plasma gun is much lower, and the properties of the coatings are better than those prepared with traditional gun.
试验结果表明：轴向送粉式等离子喷涂枪的功率明显低于普通等离子喷涂枪，其喷涂的陶瓷涂层的性能优于普通等离子喷涂。 - The main construction and key technique of long pulse length hollow cathode plasma electron gun are presented.
给出长脉冲空心阴极等离子体电子枪结构与关键技术。 - To discuss plasma cathode gun s at last.
最后讨论一下等离子体阴极电子枪。 - A compact hydrogen plasma gun system was designed and tested.
设计了一种紧凑型氢等离子体枪及驱动电路。 - Investigation of the Properties of Ceramic Coatings Sprayed with an Axially-fed Plasma Gun
轴向送粉式等离子喷涂陶瓷涂层工艺性能研究 - The principles to designed the hole used plasma gun is discussed and two kind of spraying welding procedures are put forward.
论述了内孔喷焊装置的设计原则，并提出了两种规格机筒喷焊的最佳规范。 - A key element of any plasma gun is the nozzle geometry.
任何等离子喷枪的关键要素是喷嘴的几何形状。 - Analysis of Some MW Plasma Sources and Design of a Compact Hydrogen Plasma Gun
微波等离子体源分析与紧凑型氢等离子体枪设计 - The microhardness and adhesive strength of coatings deposited by cylindrical nozzle are just a little higher than those deposited by Laval nozzle plasma gun. Moreover, the pore density is lower than the latter and the wear resistance is better than the latter.
涂层性能表明：圆柱形喷嘴等离子喷枪制备涂层的结合强度、显微硬度比Laval喷嘴等离子喷枪制备的涂层略高；而且孔隙率较后者小；涂层的耐磨性能比后者要好。 - The edge cutting experiment in the angle steel has been carried out, and the move of the robot and plasma gun is smooth.
在角钢上进行了过棱切割试验，过棱处机器人及等离子割枪切运动平稳，转角过渡平滑，型钢断面处没有错位。 - In this paper, we designed a plasma cutting gun, and analyzed the cooling channel with simulation, and several useful conclusions were made, which were helpful to the design of the plasma cutting gun.
本文主要是设计了一种等离子割炬，并对初步设计的割炬进行仿真分析，从而得出了一些有益的结论，能对以后的割炬设计有一定的参考作用。 - Plasma spraying is the process of the plasma jet produced by the plasma spraying gun. In the use of spraying gun, the working gas can have good compression on the arc through the nozzle to generate the plasma arc.
等离子喷涂是由等离子喷枪产生等离子射流，在喷枪使用中，工作气体要通过喷嘴才能对电弧进行良好压缩而产生等离子弧。 - The electric arc spraying gun and plasma spraying gun are linked with the thermal spraying cabin simultaneously by designed flange The sample can be alternate or laminate sprayed at the same time or individually.
同时利用设计的一个法兰连接，将电弧喷涂枪和等离子喷涂枪同时连接到喷涂舱上。这样可以单独或同时对试件进行交替或分层喷涂。